1, the primary should be smooth, firm, dry ly2015.2, clean, non-polluting, strength meet the design requirements. 2, at the bottom of the building to be done or cottage pavement moisture treatment. Yanji decoration 3, strengthen the composite floor coverings, room temperature should be in compliance with the product specification requirements. 4, the floor should be paved moisture skids, smooth pavement, not laminated seams and secured with tape. 5, the installation of the first row of the floor when the groove facing the wall, leaving a gap of about 10mm between the floor and the wall. 6, the length or width of the room when you need to set up more than 8m expansion joints, install flat layering. 7, wooden skirting board with a 45-degree bevel tight bond, height, consistent with a wall thickness of the cap is not exposed nails fixed. 8, baseboards laying tight joints, surface light consistency out of the wall height and thickness. With 2 meters by foot inspection, ground flatness error of less than 1 mm, the gap width of less than 0.3 mm, the skirting board mouth flatness error of less than 3 mm, patchwork flatness error of less than 2 mm. 9, if it is summer pavement, joints may be appropriate to set aside less to stay a little, if it is installed in winter, we must stay aside sewing 1:10, flat surfaces, colors, coordinated wood, clean no glue marks. Company Website: http: //www.yjhfzs.com